Skip to content

Loading StageLink™

0 items in cart

Cart

Your cart is empty.

Find your kit

Specifications

Every StageLink™ product, grouped by package. Start with Foundation, then add Enhance and Refine when you're ready.

Stage 1

Foundation

Shop this package
Imager

Imager

Type
Dash tweeter
Dome
Silk (Dynamic and Reference) or aluminium (Acoustic)
Dome diameter
1.25 in (32 mm)
Frequency response
1.5 kHz – 25 kHz
Upper limit, silk dome
24 kHz
Upper limit, aluminium dome
26 kHz
Power
20 W per tweeter
Impedance
4 Ω
Flange
Approx. 60–65 mm
Mounting cup
43–44 mm
Cup height
Approx. 18 mm
Position
Dash corners
BassPod

BassPod

Type
Under-seat subwoofer
Position
Under the passenger seat
Connection
BassPod Link plugs directly into the unit
Dimensions
To be confirmed

Foundation connects through the vehicle-specific OE-ON Link, By Pass Link and BassPod Link. Plug-in installation on supported vehicles, with the factory wiring preserved.

Stage 2

Enhance

Shop this package
Presence

Presence

Type
6.5 in woofer
Frame
165 mm
Mounting depth
68 mm
Basket
Iron
Magnet
Ferrite
Impedance
2 Ω
Rated power
50 W
Peak power
150 W
Sensitivity
89 dB
Position
Front doors
RearFill

RearFill

Type
6.5 in full-range speaker with whizzer cone
Frame
166 mm
Mounting depth
65 mm
Basket
Iron
Magnet
Ferrite
Impedance
4 Ω
Rated power
40 W
Peak power
120 W
Sensitivity
90 dB
Frequency response
50 Hz – 18 kHz
Position
Rear doors

Stage 3

Refine

Shop this package
Tune

Tune

Type
Audio processor
Position
Behind the glovebox
Connection
Tune Link, replacing the By Pass Link
Control
OE Tune app: profile, EQ, delay and routing
Dimensions
To be confirmed

Tune, full specifications

Inputs
6-channel high-level input
Input sensitivity (max)
RCA 6 Vpp; high-level 28 Vpp
Outputs (tested at 14.4 V)
2 × RCA; amplified CH1–CH4: 25 W (4 Ω, 14.4 V, 1 kHz, 10% THD)
Input impedance
RCA 10 kΩ; high-level 4.7 Ω
Output impedance
51 Ω
Output voltage (max)
RCA 6 Vpp
DSP chip / clock
AK7735, 148 MHz
EQ bands / max delay
31 bands / 7.354 ms
Sampling rate
48 kHz / 24-bit
Conversion (AD / DA)
AD: AK7735; DA: MS4434
Amplifier class
Class AB
Frequency response
20 Hz – 20 kHz
Signal-to-noise (RCA)
≥ 97 dB; RCA 98 dB
THD+N
≤ 0.01%
Noise floor
RCA −96 dB; amplifier −80 dB
Intermodulation distortion (IMD)
< 0.005%
Channel separation (crosstalk)
≥ 75 dB
Standby current
≤ 3 mA (switched off)
Operating voltage
DC 9 V – 17 V
Operating current
1 A – 15 A
Operating temperature
−20 °C to 70 °C

StageLink™ connections

Technology

Four Links connect every StageLink™ product to your car's factory system. Plug-in installation on supported vehicles, factory wiring preserved, and every stage starts from Foundation.

OE-ON Link

OE-ON Link

The vehicle-specific harness at the heart of StageLink™. It sits between the factory harness and the head unit, with an expansion port beside it for every stage that follows.

Package
Foundation (Stage 1)
Position
Behind the head unit
Fitment
Made for each vehicle and trim. Choose your vehicle to find the right OE-ON Link.

By Pass Link

Carries the signal from the OE-ON Link expansion port to the BassPod in one continuous cable, with no joints along the way.

Package
Foundation (Stage 1). Removed when you add Refine.
Connection
OE-ON Link expansion port to BassPod Link

BassPod Link

Plugs directly into BassPod's own port under the passenger seat. No extra sockets.

Package
Foundation (Stage 1)
Connection
Fed by the By Pass Link, or by the Tune Link once Refine is added

Tune Link

Brings Tune into the system. It takes the place of the By Pass Link, so the upgrade to Refine is plug-in too.

Package
Refine (Stage 3)
Connection
Connector E to the OE-ON Link expansion port; connector C to the BassPod Link

The complete StageLink™ ecosystem.

Foundation, Enhance and Refine, built to evolve with you.

Shop the ecosystem

Know your listening signature

Start with your playlist. Then tell us how you like it to sound.

What fills your playlist?

Choose everything you genuinely listen to.

What fills your playlist?